Mayfit M1220 (half-height) single-channel universal HD + dual-channel SD audio and video capture card
Simultaneously capture one HD (Universal HD input, DVI, VGA, HDMI, YPbPr) + 2 A / V signals + 1 unbalanced stereo audio
Single card to go the world
Creatively integrate VGA and SD video together. Many occasions require simultaneous acquisition of VGA and analog video signals. Teaching recording: Teacher machine picture + teacher video + student video; live surgery: medical device picture + surgery live; security check: X-ray detector + channel video; large screen display: integrated display of multiple video signal sources.
Universal HD input
HD input can dynamically switch the signal source type, including DVI, HDMI, VGA, YPbPr signals, and supports up to 1080P 60Hz signal acquisition.
|Host interface||PCI-Express x1, Low Profile, 200MB / s transmission bandwidth|
|input interface|| 1 DVI-I interface (can be converted to HDMI, VGA, YPbPr) |
1 DIN-6 interface (can transfer 2 CVBS, 1 unbalanced stereo audio line input)
|DVI video input||1 1080P / 60HZ HD DVI signal|
|VGA video input||1 VGA signal|
|HDMI video input||2 1080P / 60HZ HD HDMI signals|
|YPbPr video input||2 YPbPr signals|
|CVBS video input||2 SD video signals|
|HDMI audio input||1 LPCM audio signal|
|Analog audio input||1 analog audio signal|
|DVI input format||Compliant with DVI 1.0 standard, single connection (480i, 576i, 480p, 576p, 720p, 1080i, 1080p)|
|HDMI input format||Compliant with HDMI 1.3 standard, support 36bit DeepColor|
|YPbPr input format||480i, 576i, 480p, 576p, 720p, 1080i, 1080p|
|VGA input format|| 640 × 400 – 2048 × 1536, the pixel rate is less than 170MHz |
VGA signal provides safe mode to capture unusual resolutions
|CVBS input standard||PAL / NTSC|
|HD output format||40 × 30 – 2048 × 1536, frame rate: 1-100 fps|
|SD output format||176 × 144 – 768 × 576, frame rate: 1-30 fps|
|Analog audio sampling rate and signal-to-noise ratio||Up to 48KHz, 85db, 24-bit|
|Video sampling rate|| CVBS: 57.27MHz (4x Oversampling) |
RGB / YPbPr: 170MHz
HDMI / DVI: 225MHz
|Video sampling accuracy||10bit|
|Color space||YUYV, UYVY, I420, RGB 24 Bits, RGB 32 Bits|
|Color space conversion||Hardware color conversion|
|Deinterlacing||Vertical filtering deinterlacing; motion adaptive deinterlacing|
|Screen zoom||Hardware 5-Tap scaling|
|Screen reverse||Horizontal and vertical|
|Image adjustment|| Brightness / contrast / hue adjustment Saturation adjustment / black and white, color control Gamma adjustment (Gamm |
Adjust the brightness and contrast of R / G / B three colors independently
|Operating system support|| X86 and x64 versions of the following operating systems: |
Windows XP Professional
Windows Server 2008
Windows Server 2008 R2
|Compatible software|| Windows Media Encoder |
Adobe Flash Media Live Encoder
Real Producer Plus
VideoLAN for Windows
|Onboard memory||256MB DDR2, working frequency is 160 Mhz, bit width is 64bit|
|upgrade||Firmware can be upgraded|
|installation||Can be inserted into PCI-Express x1, x4, x8 or x16 slots; can be installed in half-height (2U), full-height (4U) chassis|
|Geometry||102.5mm x 64.5mm|
|Power consumption||<= 6W|
|Product warranty||1 year warranty|
Choose a Miffy M1220, half height, elevation
You can easily add Miffy M1220 to different models of desktops or workstations to bring high-quality enjoyment. Miffy M1220 has different models, which can be inserted into half-height and full-height chassis respectively. Fully automatic detection
Automatically detect the resolution of the input VGA signal and automatically adjust the acquisition parameters to the best, including automatic timing detection and automatic phase detection. Automatic timing detection supports a series of timing standards such as GIF, DMT, CEA, and automatically adjusts input signals that do not meet specific timing standards through image analysis algorithms. Automatic phase detection uses the image analysis function to automatically adjust the sampling phase so that the picture is automatically adjusted to the clearest. You no longer need to make any manual settings to make your capture screen without black edges and reach the best level.
High-quality audio and video experience
Adopt professional video and audio acquisition chip, self-developed image DMA transmission module in FPGA, automatic black-out and motion adaptive de-interlacing technology to further guarantee the picture quality, no smearing phenomenon in the moving picture, making the moving picture more clear; high The sampling rate and high sampling accuracy ensure that the sound sampling distortion is minimized, and the high signal-to-noise ratio ensures that the sound is pure enough to bring a higher quality audio and video experience. High-performance video processing
Adopting high-speed PCI-Express interface and high-speed large-capacity image buffer technology, effectively avoiding the phenomenon of screen drawing. Picture position adjustment is accurate to 1 pixel accuracy. Easier to use and rich color adjustment functions, such as adjusting the contrast, brightness, color saturation, hue, and gamma adjustment of the picture. Pure colors.
Compatible with multiple applications
With SimuStream function, you can use multiple applications to acquire a single signal source at the same time, and each channel will not reduce the frame rate and affect work efficiency.
Standard development interface
DirectShow Filter-based audio and video acquisition interface, DirectSound-based audio acquisition interface, IKsPropertySet-based extended interface, compatible with more software.
Hardware "soft upgrade"
Adopting a special video processing engine from Mefit, it has a high degree of flexibility. You can use the firmware and driver upgrade method to upgrade Mefit's video processing engine without changing the hardware. The effect of hardware upgrade has greatly reduced maintenance costs and enjoyed perfect service.